Home » Electrician in Loomis

Electrician Serving Loomis, CA Residential, Agricultural & Commercial

Ranches, Horse Properties, and Workshops Don't Wire Themselves, and Subdivision Electricians Don't Know How.

Loomis isn’t a subdivision. It’s 5-acre ranchettes with barns at the back of the property. Workshops with welders, compressors, and table saws pulling 240 volts. Private wells that stop delivering water when a pump circuit fails. Properties where the nearest natural gas line is a mile away, and propane is the only option for a standby generator. At Electrician Roseville, we serve Loomis properties the way they need to be served with the expertise to trench 500 feet of underground conduit to a barn, wire a 200-amp workshop sub-panel, repair a well pump circuit at 6 AM, and install a propane generator that keeps your entire property running during a PG&E PSPS wildfire shutoff. Every project is permitted through the Town of Loomis Building Department and built to current NEC and California Title 24 standards.

Our Services in Loomis

Residential Electrical

Electrical Panel Upgrades

Loomis properties demand more capacity than a standard suburban home. Your main house, barn, workshop, ADU, and well pump all draw from one service. Many older Loomis homes still have 100A or 150A panels nowhere near enough for a property with multiple outbuildings. We upgrade to 200A or 400A main panels and install sub-panels at every detached structure. For properties needing extreme capacity, we engineer multi-panel distribution systems.

Whole-House Rewiring

Older Loomis ranch houses built in the 1950s–1970s may have aging wiring, cloth-insulated conductors, aluminum branch circuits, or wiring that's been compromised by rodent damage. We replace all wiring with modern copper NM-B using fish-and-pull techniques. Rodent-damaged sections in crawlspaces and attics are a common Loomis rewiring project. We identify all damaged areas and replace them, then recommend exclusion to prevent recurrence.

EV Charger Installation

Many Loomis properties have detached garages 50–200 feet from the main house. Running a 50A EV charger circuit to a detached garage means trenching, underground conduit, and a properly sized feeder, not a simple outlet swap. We handle the full installation: panel assessment, conduit run, charger mounting, and PG&E interconnection.

GFCI & Surge Protection

Rural properties have more GFCI-required locations than suburban homes: barn outlets, workshop outlets, outdoor receptacles, well pump areas, and any location within 6 feet of water. Whole-house surge protection is essential in PG&E territory grid surges during re-energization after PSPS events can damage well pump controllers, HVAC control boards, and shop equipment.

Lighting Installation

On a 5-acre Loomis property, your driveway might be 300 feet long, and the walk from the house to the barn is another 200. Landscape lighting along paths, driveways, and between structures is essential for safety and security. We install low-voltage LED path lighting, high-bay LED arena and barn lighting, dusk-to-dawn security lighting, and accent lighting for your home and outdoor living areas.

Generator Installation

This is Loomis's most critical service. PG&E's PSPS wildfire shutoffs hit foothill communities hardest, and Loomis sits right in the zone. When the power goes out, you lose your well pump (no water), your refrigerator, your security system, your barn ventilation, and your heat. For properties with PG&E natural gas, we install NG-fueled Generac and Kohler standby generators. For properties without gas service, we install propane-fueled standby generators and coordinate LP tank sizing with your propane provider. Every installation includes an automatic transfer switch; the generator starts within 10 seconds of a power loss, with no manual intervention.

Commercial Electrical

Tenant Improvement Wiring

Downtown Loomis and the Taylor Road corridor have small commercial spaces, restaurants, boutiques, professional offices, and agricultural retail. We wire complete tenant improvement buildouts, permitted through the Town of Loomis.

LED Lighting Retrofits

Small commercial buildings, agricultural processing buildings, and community facilities in Loomis still running fluorescent or HID lighting are candidates for LED conversion. We install LED with occupancy controls and coordinate PG&E commercial rebates.

Commercial Code Violations

Older downtown Loomis commercial properties and repurposed agricultural buildings face fire marshal and building department inspections. We remediate violations and pass re-inspection.

Security & Parking Lot Lighting

Small commercial lots, agricultural properties, and community facilities need properly maintained exterior lighting. We install LED fixtures, photocells, and motion sensors.

Emergency Electrical Repairs

24/7 emergency electrical service for Loomis residential, agricultural, and commercial. Well pump failures are Loomis's most common emergency call when the pump stops, you have no water for the house, no water for the horses, and no fire suppression for the property. Storm damage, PSPS generator failures, and service entrance damage from fallen trees are also common.

Loomis Areas We Serve

From rural ranches and equestrian properties along Horseshoe Bar and Brace Road to custom homes near Barton Road and Sierra College, we serve all of Loomis. Our electricians handle residential and small commercial needs, including panel upgrades, barn and workshop wiring, generators, and modern electrical installations. We understand the unique demands of both rural acreage and historic areas around Downtown Loomis.
Not listed? Call us, we serve the majority of Northern California and are happy to assess your area.

Your Loomis Property Is More Than a House. Your Electrician Should Know That.

A house, a barn, a workshop, a well, a guest house, and a 5-acre lot connected by underground conduit that’s a Loomis property. Subdivision electricians see a panel and a few outlets. We see an entire infrastructure system that has to work together from the PG&E meter to the barn sub-panel 400 feet away. That’s the difference between an electrician who serves Loomis and an electrician who understands Loomis.

Frequently Asked Questions

Do you serve Loomis, or only Roseville?
We serve both. Loomis is one of our core service areas where we work on rural properties, horse ranches, and custom homes throughout the town. We understand the Town of Loomis permit process, PG&E utility requirements, and the specific challenges of acreage properties with outbuildings, wells, and propane systems.
Yes. We trench and install underground conduit (PVC or rigid) from your main panel to any structure on your property. Runs of 400–500+ feet are routine in Loomis. We size the feeder wire for the full expected load of the barn sub-panel, accounting for voltage drop over the distance.
Propane (LP). We install propane-fueled Generac and Kohler standby generators and coordinate with your propane provider for tank sizing and placement. The generator operates identically to a natural gas unit, with automatic startup, automatic transfer, runtime limited only by tank size.
If it’s an electrical failure, yes. Most well pump failures are electrical: tripped breaker, failed pressure switch, burned-out control panel, or damaged wiring. We diagnose and repair the electrical side. If the pump motor itself is dead, we’ll refer you to a well pump specialist and handle the electrical once the new pump is in.
Yes. We wire workshops with 200A sub-panels and individual 240V circuits for every heavy tool welder, compressor, table saw, planer, and dust collector. Each circuit is sized for the specific tool’s motor load, not daisy-chained off a single breaker.
The Town of Loomis Building Department. Loomis is an incorporated town with its own building division. We handle the permit application and inspection scheduling.
Scroll to Top