LED Lighting Retrofits in Roseville, CA
Your Fluorescent Lights Are Costing You Twice: Once in Energy, Again in Maintenance. LED Ends Both.
Our LED Retrofit Services
Office & Commercial Interior
Drop-ceiling troffers, surface-mount fixtures, and recessed fluorescent panels are the most common commercial lighting and the easiest to convert. We retrofit 2x2 and 2x4 troffers with LED flat panels or LED tube conversions, upgrade retail track lighting from halogen to LED, and convert medical and dental offices to high-CRI LED fixtures for accurate color rendering in exam rooms and operatories.
Parking Lot & Exterior
Metal halide and high-pressure sodium parking lot lights consume 250–1,000 watts each and take 10–15 minutes to restrike after a power interruption. LED replacements draw 75–300 watts, turn on instantly, and last 100,000+ hours. We retrofit pole-mounted area lights, wall packs, canopy lights, building-mounted floods, and exterior sign lighting, all with photocell or timer automation for dusk-to-dawn operation.
Warehouse & Industrial
High-bay fluorescent and HID fixtures in warehouses, manufacturing floors, and distribution centers waste enormous energy and produce poor light quality. LED high-bays deliver 2–3x better foot-candle levels at 50–70% less wattage, with instant-on capability and no warm-up time. We retrofit ceiling-mounted high-bays, aisle lights, loading dock fixtures, and cold-storage rated lights for freezer and cooler environments.
Residential LED Conversion
Halogen recessed cans, fluorescent garage shop lights, incandescent closet fixtures, and under-cabinet fluorescent strips are all candidates for LED conversion. We install canless LED wafer retrofit kits in existing recessed housings, convert garage fluorescent to integrated LED shop lights, and upgrade kitchen under-cabinet fluorescent to hardwired LED strips, all with dimming capability where you want it.
Specialized Retrofit Services
Commercial Interior LED Retrofit
Your office, retail store, medical practice, or community building runs hundreds or thousands of fluorescent fixtures each one consuming 30–70% more energy than its LED equivalent. We audit every fixture, specify the correct LED replacement (tube, panel, or complete fixture), coordinate your utility rebate pre-approval, and execute the installation with minimal disruption to your operations. Most office retrofits are completed after hours or on weekends. You arrive Monday morning to better light and a lower utility bill.
Parking Lot & Exterior LED
Your parking lot lights are visible to every customer, tenant, and employee and they're likely your single highest-wattage lighting load. A 400W metal halide pole light replaced with a 150W LED fixture saves 250 watts per light, per hour of operation. Multiply that across 20 poles running 12 hours a night, and you're looking at thousands of dollars per year in energy savings before the rebate. We handle pole-top fixture replacement, photocell automation, and any electrical modifications needed at the pole base or junction.
Warehouse & Industrial LED
Industrial LED high-bays are the fastest-payback retrofit in commercial lighting. A typical 400W metal halide high-bay replaced with a 150W LED high-bay saves 62% on energy, delivers better foot-candle levels on the warehouse floor, eliminates the 5–10 minute restrike delay after power interruptions, and lasts 100,000+ hours, effectively ending your lamp replacement program. We install new LED high-bays, occupancy sensors for aisle control, and emergency battery backup units where code requires them.
Why Roseville Businesses Choose Electrician Roseville
We Handle the Rebate
Most electricians install LED and tell you to figure out the rebate yourself. We handle the entire process, pre-approval, DLC fixture specification, post-install documentation, and submission. You get the check without doing the paperwork.
We Specify, Not Just Install
We don't pull random LED tubes off the shelf. Every fixture is DLC-certified, rated for your environment (high-temp, damp, cold storage), and matched to your existing infrastructure. If your troffers are damaged or obsolete, we recommend full fixture replacement instead of wasting money retrofitting a failing housing.
We Know Title 24
California's energy code applies to most commercial retrofits and many electricians don't mention it until you fail inspection. We assess your Title 24 obligations upfront and include any required controls in your scope and bid from day one.
Our Step-by-Step Retrofit Process
01
Lighting Audit & Energy Baseline
We walk your facility and document every fixture type, wattage, condition, operating hours, and control method. We calculate your current energy consumption and establish the baseline for rebate applications and ROI projections.
02
LED Specification & Rebate Pre-Approval
We specify DLC-certified LED replacements matched to your facility's needs (color temperature, lumen output, mounting type, control compatibility). We submit the rebate pre-approval application to your utility before any materials are ordered.
03
Installation
We schedule installation to minimize disruption after-hours, weekends, or phased by zone for facilities that can't shut down. Ballasts are removed (Type B), fixtures are replaced where needed, and controls (sensors, dimmers, photocells) are installed per the scope. Old lamps and ballasts are disposed of in compliance with hazardous waste regulations.
04
Verification & Documentation
We test every fixture for proper light output, dimming response, and sensor function. We photograph the completed installation, document fixture counts and wattages, and submit the post-install verification to your utility for rebate processing. You receive a complete project file, fixture schedule, energy savings summary, rebate confirmation, and warranty documentation.